Shenzhen Juson Technology Co., Ltd

The products of Siemens, Schneider, Honeywell, ABB. Panasonic. Yaskawa etc

banner
banner

Allen Bradley 20DC022A0EYNANBNE

Products

Allen Bradley 20DC022A0EYNANBNE

Product No.:2023122015047

  • Details

Technical Specifications

Mechanical

Degree of protection (IP) IP20
Shock 10 G peak for 11 ms duration (±1.0 ms)
PWM frequency 4 kHz @ 650V DC
Vibration 0.152 mm (0.006 in.) displacement, 1 G peak, 5.5 Hz

Electrical

Number of analogue outputs 2
Mains voltage 480 V
Integrated breaking resistance No
Max. output voltage 932 V
Internal dynamic brake resistors 115 Ohm
DC bus overvoltage trip 810V DC @ 480V
DC nominal bus voltage 648V DC @ 480V
Brake IGBT Brake IGBT installed
Internal communication module No communication module
Fuse current rating 40 A @ 650V DC
Input voltage rating 480V AC, 3-phase, 60 Hz
Displacement power factor 0.98 across speed range
Output current, continuous 22 A @ 650V DC
Output current, 1 min 24.2 A @ 650V DC
Output current, 3 sec 33 A @ 650V DC
Circuit breaker current rating, max 80 A @ 480V AC, 3-phase
Motor circuit protector current rating, max 30 A @ 480V AC, 3-phase
Logic control ride-thru 0.25 seconds, drive not running
Brake resistor No internal brake resistor
Input current rating 23.3 A @ 650V DC
Rated power rating 15 Hp @ 650V DC, normal duty
Documentation English documentation
Carrier frequency Drive rating: 4 kHz, settings: 2, 4, 6, 8, 10 kHz (6 kHz is for V/Hz operation only)
AC input overvoltage trip 600V AC @ 480V (six pulse, 3-phase)
Input power rating 16.6 kVA @ 480V AC, 3-phase
Electronic motor overload protection Class 10 motor overload protection according to NEC article 430 and motor over-temperature protection according to NEC article 430.126 (A)(2). UL 508C file E59272
Dual element time delay fuse current rating 25...50 A @ 480V AC, 3-phase
Non-time delay fuse current rating 25...80 A @ 480V AC, 3-phase
Heat sink thermistor Monitored by microprocessor overtemperature trip
Drive to motor power ratio, max The drive to motor rating cannot exceed a 2:1 ratio
Stop modes Multiple programmable stop modes including – Ramp, Coast, and Current Limit
Acceleration/deceleration Independently programmable accel and decel times adjustable from 0 to 6553.5 in 0.1 second increments
Number of digital inputs 6
Number of digital outputs 2
Number of analogue inputs 3
Motor voltage, nom 460V @ 380...400V drive rating, 480V nominal line voltage
Human interface model No HIM (no blank plastic inserted)
Additional configuration Phase II control
Max. output frequency 400 Hz
Line voltage, nom 480V @ 380...400V drive rating, 460V nominal motor voltage
Mains frequency 60 Hz
Internal EMC filtering With EMC filter & common mode choke
Watt loss 389 W @ 480V AC, 15 Hp normal duty, 10 Hp heavy duty
Feedback option Future use
Drive full power range 460...528V @ 380...400V drive rating, 460V nominal motor voltage
Drive operating range 325...528V @ 380...400V drive rating, 460V nominal motor voltage
Torque regulation Torque regulation - without feedback: ±5%, 600 rad/sec bandwidth
Enclosure type IP20/NEMA/UL Type 1
Output current rating 22 amps, 15 Hp normal duty, 10 Hp heavy duty, frame 1
Control options Phase II control, expanded cassette
Drive overcurrent trip Software current limit: 105% of motor rated to 200% of drive rated current
Efficiency 97.5% at rated amps, nominal line volts
Speed control Speed regulation - without feedback: 0.1% of base speed across 120:1 speed range, 120:1 operating range, 50 rad/sec bandwidth
Current limit capability Independent motoring and regenerative power limits programmable to 800% of rated output current
Selectable motor control Field oriented control with and without a feedback device and permanent magnet motor control
Input phases Six-pulse, 3-phase input provides full rating for all drives, single-phase operation provides 50% of rated current
Control method Induction motor and brushless motor: sine coded PWM with programmable carrier frequency, indirect self organized, field-oriented control, current-regulated, ratings apply to all drives, refer to the PowerFlex 700S Phase ll control reference manual, public
Number of phases output 3
Number of phases input 3
Relative symmetric net voltage tolerance 10 %
Input frequency, max 400 Hz
Output frequency range 0 Hz
DC bus undervoltage trip Adjustable
Output voltage range 0 to rated motor voltage
Power ride-thru 15 milliseconds at full load
S-curve time Adjustable 0.5...4.0 seconds
Short circuit trip Phase-to-phase on drive output
Ground fault trip Phase-to-ground on drive output
Control logic noise immunity Showering arc transients upto 1500V peak
Line transients Up to 6000 volts peak per IEEE C62.41-1991
Intermittent overload 110% overload capability for up to 1 minute, 150% overload capability for up to 3 seconds
Short circuit current, max Using recommended fuse or circuit breaker type: maximum short circuit current rating to match specified fuse/circuit breaker capability ≤200000 Amps
Encoder voltage supply 5V DC or 12V DC 320 mA/channel, 5V DC minimum high state voltage state of 0.4V DC, 12V DC minimum high state voltage of 7.0V DC, maximum low state voltage of 0.4V DC

Construction

Height, approx 336 mm
Depth, approx 200 mm
Width, approx 166.9 mm
Weight, approx Drive: 7.03 kg

Environmental

Sound level Frame 1: 59 dB @ 30 CFM fan speed
Altitude 1000 m (3300 ft.) maximum without derating
Degree of protection (NEMA) 1
Atmosphere Drive must not be installed in an area where the ambient atmosphere contains volatile or corrosive gas, vapors, or dust, If the drive is not going to be installed for a period of time, it must be stored in an area where it will not be exposed to a corrosi
Operating temperature 50 °C @ 650V DC
Storage temperature -40 °C
Relative humidity 5...95% noncondensing
Surrounding air temperature without derating NEMA/UL Type 1: 0° to 40° C (32° to 104° F)

Previous Product:Standard Extension Cable 330130-080-01-00 Bently Nevada

Next Product:EBM G2E140-AE77-79 Fan

Post your feedback

Wechat Code
Wechat